Views: 0 Author: Site Editor Publish Time: 2025-08-11 Origin: Site
You can put in a lazy susan cabinet by measuring your space first. Pick the right type for your kitchen. Follow easy steps to install it. Measuring is important because a lazy susan needs space to turn. It also needs room to hold your kitchen things. Look at the most common types below:
Type | Best Fit For |
|---|---|
Kidney | 90-degree base corners |
Full Round | Diagonal or upper cabinets |
D-Shaped | Wall cabinets above appliances |
Pie Cut | Door-mounted access |
Half-Moon | Blind corner cabinets |
A lazy susan helps you keep your kitchen neat. You can reach pots, pans, and snacks fast. Most people find it easy to install one themselves.
Measure your cabinet space with care. Check the height, width, and shape. This helps make sure the lazy susan fits and spins well.
Pick the lazy susan type and size that fit your cabinet. Think about your storage needs for better kitchen organization.
Get all the tools and parts you need before you start. This will make the installation easier and quicker.
Follow each step to install: put together the parts, secure the base and pole, add the shelves, and check if it spins.
Keep your lazy susan in good shape by leveling the shelves. Tighten screws often. Clean the moving parts. Fix any wobbling or sticking.
First, get your measuring tape. Measure the inside height of your cabinet. Next, measure across the cabinet to find the diameter. If you have a corner cabinet, measure both sides and the diagonal. Write down all your measurements. This helps you choose a lazy susan that fits well.
Tip: Measure in a few different places. Cabinets are not always perfectly square. Check your numbers again so you do not make mistakes later.
Look at your cabinet’s shape. Is it L-shaped, diagonal, or a blind corner? Make sure there is enough space for the lazy susan to turn. Check if the doors open wide enough. See if hinges or thick doors might block the turn. Leave a little space between doors so the lazy susan moves easily.
Common mistakes when measuring:
Not leaving enough space for turning
Forgetting to check if the cabinet is square
Missing hinge or overlay space
Think about what you want to keep inside. Do you need space for pots, pans, or snacks? A lazy susan shelf system helps you organize and reach things easily.
Pick a lazy susan that fits your kitchen’s shape. Kidney-shaped trays are good for L-shaped corners. Full-round trays work in diagonal cabinets. At Highend Home, we have many kitchen cabinets and cabinets hardware for you. Our wood choices, like maple and birch, are strong and look nice.
Lazy Susan Type | Best For | Features |
|---|---|---|
Full Circle | Cross corner cabinets | Spins all the way around |
Kidney-Shaped | L-shaped corners | Uses corner space well |
Half-Moon | Blind corner cabinets | Slides and turns |
Pie Cut | Door-mounted access | Turns with the cabinet door |
D-Shaped | Diagonal cabinets | Fits across at an angle |
Pick a size that fills your cabinet but still turns easily. Decide if you want two or three shelves. Make sure the lazy susan shelf system matches your cabinet’s shape and what you want to store.
At Highend Home, we help you get the right lazy susan for your kitchen. Our team can help you pick the best size, shape, and material.
You will need:
Measuring tape
Pencil
Ruler
Level
Get ready with:
Drill and drill bits
Screws (usually 8)
Shims (to make things level)
Compass (for marking curves)
If you want to make your project special, you might use:
Safety goggles
Screwdriver (flathead and Phillips)
Special hardware (check your kit)
Look at the manufacturer’s instructions for any special tools. Having all your tools ready helps the job go faster.
Start by opening your lazy susan cabinet kit. Lay out all the parts on a clean surface. You might see shelves, a center pole, base plate, screws, and brackets. Check the parts list in your kit.
Look over each piece. Make sure nothing is missing or broken. If you find a problem, contact the supplier before you start.
Take a few minutes to read the instructions that came with your kit. Every lazy susan can be a little different. The guide will show you the best way to put it together.
Put small parts like screws and brackets in a bowl or tray. Keep tools close by. This makes the job easier and helps you avoid losing anything.
Tip: Double-check your measurements before you start. This helps you avoid buying parts that do not fit.
Common mistakes during assembly:
Not measuring correctly
Ignoring weight limits for shelves
Skipping the level check
Place the base plate in the center of your cabinet. Make sure it sits flat.
Use a pencil to mark where the screws will go. Put on safety goggles before you drill. Always follow the instructions for your kit and stay safe.
Drill pilot holes, then use screws to attach the base plate. Tighten them so the plate does not move.
Slide the center pole into the base plate. Adjust it so it stands straight. If your kit has sockets at the top and bottom, fit the pole into both.
Make sure the pole is level. If it feels wobbly, adjust the screws.
Take each shelf and slide it onto the pole. Start with the bottom shelf.
Move the shelves up or down to the right height for your items. Most kits let you set the height.
Use the hardware from your kit to lock the shelves in place. Tighten all screws.
Spin each shelf to check for smooth movement. If a shelf sticks or squeaks, add a little silicone spray. Make sure nothing blocks the turn.
Note: If you notice misaligned shelves or loose screws, fix them now. Regular cleaning and tightening will keep your lazy susan working well.
You want your lazy susan cabinet to feel sturdy and safe. After you finish installing the shelves, grab your level. Place it on each shelf. If you see the bubble off-center, adjust the pole or use shims under the base plate. Tighten all screws with your screwdriver. Loose screws can make the shelves wobble or tilt. If you notice the cabinet still feels unstable, check the mounting brackets. Sometimes, adding a support bracket under the tray helps keep everything steady, especially if you plan to store heavy pots or pans.
Tip: Always double-check the tightness of your screws after a few days of use. Cabinets can settle, and screws may loosen over time.
Now, give your lazy susan a spin. Each shelf should turn smoothly without sticking or scraping the cabinet walls. If you feel resistance, stop and look for anything blocking the path. Sometimes, a shelf might be too close to the door or side panel. Adjust the shelf height or move items that stick out. Try spinning the shelves both ways. If you hear squeaks, a little silicone-based lubricant on the bearings can help.
Checklist for smooth rotation:
Shelves spin freely
No scraping or bumping
No loud squeaks or grinding sounds
Sometimes, you might run into problems with your lazy susan cabinet. Here are some common issues and how you can fix them:
Dirt or crumbs can build up in the bearings or moving parts. Wipe them clean with a damp cloth.
Rusted or worn parts can make the shelves stick. Use a silicone-based spray to lubricate the moving parts.
If the shelves feel unbalanced, check how you placed your items. Spread the weight evenly across the tray.
Loose screws or fasteners can cause wobbling. Tighten them with your screwdriver. If a screw hole is stripped, use a slightly larger screw or a wood filler.
If the tray still feels unstable, add a support bracket underneath for extra strength.
Note: Regular cleaning and quick fixes keep your lazy susan cabinet working like new. If you ever need help, Highend Home’s team is ready to answer your questions and offer support.
You can install a lazy susan cabinet by following these steps:
Clear out your cabinet and measure the space.
Gather your tools and safety gear.
Place the cabinet, shim to level, and pre-drill holes.
Secure the cabinet and check for level.
Attach shelves and test rotation.
Enjoy your new organized kitchen! If you want expert advice or a perfect fit, Highend Home’s team is ready to help you make every corner count.
You can wipe the shelves with a damp cloth. Use mild soap for sticky spots. Remove crumbs from the corners. Clean the bearings with a dry cloth. Regular cleaning keeps your kitchen organized and your lazy susan working smoothly.
You can install a lazy susan cabinet in most kitchens. Measure your space first. Check the cabinet shape and door clearance. Highend Home offers custom options for different layouts. You get better storage and easy access in almost any kitchen.
You need a measuring tape, drill, screwdriver, level, and pencil. Safety goggles help protect your eyes. Most kits include screws and brackets. Check your instructions for special hardware. Having the right tools makes installation faster and easier.
You can tighten the screws with a screwdriver. Use shims under the base plate to level the shelf. Clean the bearings and add a little silicone spray. If the shelf still wobbles, contact Highend Home for support or advice.
Highend Home gives you expert advice, fast delivery, and custom solutions. You get strong materials and stylish designs. Our team helps you pick the best fit for your kitchen. Many customers trust us for quality and service.
Need help? Reach out to Highend Home’s team for answers and support. Your kitchen can be organized and easy to use!
